Electrical test & measurement

HIOKI BT3554 Portable Battery Tester

The HIOKI BT3554 is a portable battery tester for diagnosing UPS and stationary lead-acid batteries without taking them offline.

Brand
HIOKI
Reference
BT3554-50
Datasheet
PDF by email
Supply
Morocco & Africa

Description

The HIOKI BT3554 is a portable battery tester for diagnosing UPS and stationary lead-acid batteries without taking them offline. It measures and saves internal resistance and voltage in about 2 seconds, and its comparator gives an immediate pass, warning or fail judgment for each cell. Measurement and recording guidance speeds up rounds in battery rooms, and the optional Z3210 wireless adapter sends results to a phone or tablet for reporting in data centers, telecom sites and substations.

At a glance

Target batteries
Large lead-acid and UPS batteries
Measurement time
Measure and save data in 2 seconds
Judgment
Comparator function with pass / warning / fail decision

Additional technical specifications

Use these listed characteristics as a starting point. Confirm the final specification for your chosen configuration.

Guidance
Measurement and recording guidance
Wireless
Wireless communication when the Z3210 adapter is connected
Key applications
UPS battery maintenance, substation and telecom battery banks, data centers

Available Models

Model options differ by configuration and application. Include the model reference in your enquiry if you have one.

ModelDescription
BT3554-50Instrument only
BT3554-51Bundle with 9465-10 pin-type leads
BT3554-52Bundle with L2020 pin-type leads
Back to product enquiry
HIOKI BT3554 Portable Battery Tester – Battery testers
Component & Battery Testing · Battery testers

Compare other instruments in our catalog before defining your requirements.

Explore this category
HIOKI BT4560 Battery Impedance Meter

Electrical test & measurement

HIOKI BT4560 Battery Impedance Meter

The HIOKI BT4560 battery impedance meter judges the quality of lithium-ion cells in about 10 seconds using low-frequency AC-IR measurement. By varying the measurement frequency from 0.1 Hz to 1050 Hz, it captures both electrolyte resistance and reaction resistance, offering a fast alternative to charge/discharge DC-IR testing. It measures impedance and voltage at the same time, accepts cells up to 5 V and comes with software for Cole-Cole plots, making it suited to cell grading, incoming inspection and second-life battery evaluation.

View product
HIOKI BT3561A / BT3562A / BT3563A / BT3564 Battery HiTester

Electrical test & measurement

HIOKI BT3561A / BT3562A / BT3563A / BT3564 Battery HiTester

The HIOKI BT356xA series and BT3564 Battery HiTesters measure internal resistance and voltage of cells, modules and packs on production and inspection lines. Models are matched to the battery voltage, from small cells and 60 V packs up to 1000 V packs for electric vehicles and energy storage systems. Higher tolerance to line resistance, standard LAN and improved electrostatic and noise resistance make automatic battery test systems easier to design and more stable in operation.

View product
HIOKI IM7580 Series High-Frequency Impedance Analyzer

Electrical test & measurement

HIOKI IM7580 Series High-Frequency Impedance Analyzer

The HIOKI IM7580 series are high-frequency impedance analyzers for inspecting RF inductors, capacitors and EMC components on production lines and in the laboratory. Five models cover measurement frequencies from 100 kHz up to 3 GHz, each working in both impedance analyzer and LCR meter modes. A 0.5 ms analog measurement time, 0.07% typical repeatability, a contact check and five equivalent-circuit analysis models support fast, reliable sorting of common-mode filters, ferrite bead arrays and power inductors.

View product
HIOKI IM3590 Chemical Impedance Analyzer

Electrical test & measurement

HIOKI IM3590 Chemical Impedance Analyzer

The HIOKI IM3590 is a chemical impedance analyzer for electrochemical impedance spectroscopy of batteries, electrochemical components and materials. It sweeps from 1 mHz to 200 kHz with ±0.05% basic accuracy and uses an automatically adjusted DC bias to measure the internal impedance of battery cells. Cole-Cole plots and equivalent-circuit analysis are built in and shown on the 5.7-inch touch display, giving battery and materials researchers results without external software.

View product

Need help with the right configuration?

Share your measurement requirements and site conditions. We can review the product configuration with you before preparing a quotation.

Request a quotation