Electrical test & measurement

Electrical Test and Measurement Instruments in Morocco

Power analyzers, recorders, battery testers, insulation testers and clamp meters

Explore HIOKI electrical test and measurement instruments in Morocco: power analyzers, power quality analyzers, data loggers, LCR meters, battery testers, insulation testers, clamp meters and earth testers.

Choose an electrical test instrument by the job to be done

Start from the measurement task. For efficiency testing of inverters, motors and converters, compare power analyzers and current sensors by accuracy, bandwidth and channel count. For network disturbances and energy audits, look at power quality analyzers and power loggers. Memory recorders and data loggers capture waveforms and long-term trends. Component and battery work calls for LCR meters, resistance meters and battery testers, while installation and maintenance teams rely on insulation testers, clamp meters, earth testers and multimeters with the right CAT safety rating. Open a model page for its specifications before requesting a quotation.

Instruments in this category (54)

Power & Energy Analysis

(9)
HIOKI PW8001 Power Analyzer
Power analyzers

HIOKI PW8001 Power Analyzer

The HIOKI PW8001 is a high-precision power analyzer for inverter, motor and power-conversion efficiency testing. With ±0.03% basic power accuracy, up to 8 modular channels, 15 MS/s sampling and a DC to 5 MHz bandwidth, it measures SiC and GaN converters, EV dual-inverter drives, solar inverters and energy-storage systems on one instrument. Automatic phase shift correction (APSC) keeps high-current, high-frequency measurements accurate. Neodyn Group supplies the PW8001 in Morocco with the input units and current sensors matched to your test bench.

View specifications
HIOKI PW6001 Power Analyzer
Power analyzers

HIOKI PW6001 Power Analyzer

The HIOKI PW6001 power analyzer delivers ±0.02% basic accuracy for measuring high-efficiency inverters and motors. Six power channels, 5 MS/s sampling with 18-bit resolution and a DC to 2 MHz bandwidth capture input, output and loss in a single test, while harmonic analysis to the 100th order, FFT and user-defined calculations support R&D work. It is a strong choice for motor-drive, EV powertrain and power-electronics laboratories that need traceable efficiency figures.

View specifications
HIOKI PW3390 4-Channel Power Analyzer
Power analyzers

HIOKI PW3390 4-Channel Power Analyzer

The HIOKI PW3390 is a compact 4-channel power analyzer with ±0.04% basic accuracy for bench and on-site power measurement. It combines 500 kS/s sampling, a DC to 200 kHz bandwidth, 100th-order harmonic analysis, FFT and three-channel motor analysis in a portable chassis. Engineers use it to evaluate EV, HEV and PHV inverters and motors, solar and wind power conversion and smart-grid equipment, and to assess fuel efficiency in line with the international WLTP standard.

View specifications
HIOKI PW3337 / PW3335 AC/DC Power Meter
Power meters

HIOKI PW3337 / PW3335 AC/DC Power Meter

The HIOKI PW3337 and PW3335 are benchtop AC/DC power meters for production testing and energy-consumption measurement. The three-channel PW3337 accepts 65 A direct input and suits no-load loss testing of transformers and motors, while the single-phase PW3335 measures standby power of home appliances in line with IEC 62301. Both offer ±0.1% basic accuracy, a 100 kHz bandwidth, IEC 61000-4-7 harmonic analysis and reliable readings even at low power factor.

View specifications
HIOKI Pass-Through AC/DC Current Sensors (CT6862 to CT6904A)
Current sensors

HIOKI Pass-Through AC/DC Current Sensors (CT6862 to CT6904A)

HIOKI pass-through current sensors are high-accuracy AC/DC zero-flux sensors for power analyzers and memory recorders. The range covers rated currents from 50 A to 2000 A, with bandwidths up to DC to 10 MHz and amplitude accuracy from ±0.02% rdg, so one family serves inverter development, EV drive testing and high-current power conversion. Most models support automatic phase correction with the PW8001, and 3 m or 10 m cable versions suit test benches and climate chambers.

View specifications
HIOKI Clamp-Type AC/DC Current Sensors (CT6841A to CT6846A, 9272-05)
Current sensors

HIOKI Clamp-Type AC/DC Current Sensors (CT6841A to CT6846A, 9272-05)

HIOKI clamp-type current sensors let you measure AC/DC current for power analysis without disconnecting the conductor. The CT6841A to CT6846A probes cover 20 A to 1000 A with ±0.2% rdg accuracy and bandwidths up to DC to 2 MHz, while the 9272-05 clamp handles AC measurement at 20 A or 200 A. With a -40 °C to 85 °C operating range and automatic phase correction on the PW8001, they suit in-vehicle wiring, installed inverters and field commissioning where a pass-through sensor cannot be fitted.

View specifications
HIOKI PW9100A Direct-Wired AC/DC Current Box
Current sensors

HIOKI PW9100A Direct-Wired AC/DC Current Box

The HIOKI PW9100A is a direct-wired AC/DC current box for the highest-accuracy power measurements at up to 50 A. Wiring the conductor to its M6 screw terminals gives ±0.02% rdg accuracy across a DC to 3.5 MHz bandwidth, which makes it suited to efficiency testing of low-current converters, power supplies and reactor loss evaluation. It is available with 3 or 4 channels and supports automatic phase correction when used with the PW8001 power analyzer.

View specifications
HIOKI PQ3198 Power Quality Analyzer
Power quality analyzers & loggers

HIOKI PQ3198 Power Quality Analyzer

The HIOKI PQ3198 is an IEC 61000-4-30 Class A power quality analyzer for diagnosing the electrical disturbances that damage equipment and stop production. It records voltage dips, swells, interruptions, transients, harmonics, high-order harmonics, inrush current and frequency fluctuations at the same time, with ±0.1% basic voltage accuracy and GPS time synchronization. Two-circuit measurement and support for DC, 50 Hz, 60 Hz and 400 Hz lines make it a practical tool for power quality audits, EN 50160 surveys and troubleshooting in Moroccan plants and utilities.

View specifications
HIOKI PW3365 Clamp-On Power Logger
Power quality analyzers & loggers

HIOKI PW3365 Clamp-On Power Logger

The HIOKI PW3365 is a clamp-on power logger for energy audits and load studies, and it can be used with the PW9020 non-contact voltage sensor so no metal touches live parts. It measures voltage up to 520 V, records power consumption and demand for months on an SD card, and its QUICK SET guidance helps avoid wiring mistakes. Energy managers use it to profile building and factory loads, verify savings after efficiency work and size new installations.

View specifications

Recorders & Data Loggers

(10)
HIOKI MR6000 Memory HiCorder
Memory recorders

HIOKI MR6000 Memory HiCorder

The HIOKI MR6000 Memory HiCorder is a high-speed waveform recorder with isolated inputs for inverter, ECU and power-electronics testing. It samples at 200 MS/s, records up to 32 channels simultaneously and saves 1 MS/s data on all channels to SSD in real time for long-duration tests. A 12.1-inch touchscreen and mixed inputs for voltage, current, temperature, vibration and logic signals make it a complete data acquisition recorder for R&D laboratories and commissioning teams.

View specifications
HIOKI MR8827 Memory HiCorder
Memory recorders

HIOKI MR8827 Memory HiCorder

The HIOKI MR8827 Memory HiCorder is a multi-channel waveform recorder built for power generation and utility testing. It records from 32 analog plus 32 logic channels up to 28 analog plus 64 logic channels, samples all channels simultaneously at up to 20 MS/s and isolates every input for safe measurement. With 512 MW of built-in memory, it captures the signals of several systems at once during commissioning and fault investigation in thermal, hydro, solar and wind plants.

View specifications
HIOKI MR8847A Memory HiCorder
Memory recorders

HIOKI MR8847A Memory HiCorder

The HIOKI MR8847A Memory HiCorder combines waveform recording with waveform generation for simulation testing. Fitted with the U8793 arbitrary waveform generator unit, it can replay recorded disturbances to test equipment response, while 20 MS/s simultaneous sampling and fully isolated inputs handle demanding electrical measurements. It is widely used for heavy electromechanical work on motors, transformers, inverters, UPS systems and switching power supplies, with a built-in printer for on-site reports.

View specifications
HIOKI MR8875 Memory HiCorder
Memory recorders

HIOKI MR8875 Memory HiCorder

The HIOKI MR8875 Memory HiCorder is a portable A4-size multi-channel logger with 1000 V direct input. It records 16 analog, 8 logic and 2 pulse channels with high-speed simultaneous sampling on every input, and accepts CAN bus signals for vehicle testing. Its compact format suits automotive work on EV and HEV motors, ECUs and batteries, as well as railway, marine and avionics measurements where bench recorders are impractical.

View specifications
HIOKI MR8880 Memory HiCorder
Memory recorders

HIOKI MR8880 Memory HiCorder

The HIOKI MR8880 Memory HiCorder is a rugged 4-channel field recorder for electrical maintenance and service work. Four fully isolated channels cover a three-phase line plus one extra signal, and CAT III 600 V isolation allows direct measurement of a 480 V power line. Built to operate from -10 °C to 50 °C, it helps maintenance teams capture intermittent faults, motor starts and supply disturbances on industrial sites.

View specifications
HIOKI MR8870 Memory HiCorder
Memory recorders

HIOKI MR8870 Memory HiCorder

The HIOKI MR8870 is a compact 2-channel memory recorder that captures both waveforms and RMS variations in a single handheld device. Its RMS recording mode tracks voltage and current fluctuations over time, and two units can be synchronized through the PC application to work as a 4-channel recorder. Light and easy to carry, it gives maintenance technicians strong analysis capability for on-the-go troubleshooting.

View specifications
HIOKI SP3000 / SP7000 Non-Contact AC Voltage & CAN Sensors
Memory recorders

HIOKI SP3000 / SP7000 Non-Contact AC Voltage & CAN Sensors

The HIOKI SP3000 and SP7000 are non-contact sensors that read signals through the wire insulation, without stripping or piercing the cable. The SP7000 senses CAN and CAN FD bus signals precisely over the insulation, and the SP3000 lets you observe AC voltage waveforms on an oscilloscope or recorder simply by clipping the probe onto the conductor. Their slim design reaches difficult areas of a wiring harness, which makes them practical for vehicle electrical development and diagnostics.

View specifications
HIOKI LR8450 Memory HiLogger Data Logger
Data loggers

HIOKI LR8450 Memory HiLogger Data Logger

The HIOKI LR8450 Memory HiLogger is a portable data logger that scales up to 330 channels using plug-in and wireless measurement units. It logs voltage, temperature, humidity, resistance, strain and CAN signals, measures dynamic strain wirelessly at 1 ms sampling and connects up to 11 units at once. Remote control and file download from a computer make it well suited to on-board vehicle testing, machine monitoring and multi-point temperature surveys in the field.

View specifications
HIOKI LR8410 Wireless Logging Station
Data loggers

HIOKI LR8410 Wireless Logging Station

The HIOKI LR8410 Wireless Logging Station collects multi-channel data over Bluetooth® from remote logging modules, removing long sensor cables and the noise they pick up. It handles 15 to 105 isolated input channels across up to 7 modules and samples every channel at 100 ms. Users log DC voltage, temperature, humidity, pulse, current, resistance and rotation in ovens, vehicles, control panels and other places where wiring to a central logger is difficult.

View specifications
HIOKI LR8431 / LR8432 Memory HiLogger
Data loggers

HIOKI LR8431 / LR8432 Memory HiLogger

The HIOKI LR8431 and LR8432 are compact 10-channel data loggers for everyday temperature and voltage recording. The LR8431 logs DC voltage, temperature, pulse and rotation with 10 ms sampling on all channels, while the LR8432 heat flow logger simplifies heat-flow measurement to evaluate insulation performance and reveal the causes of temperature change. Both are handheld instruments that fit maintenance, HVAC, building-energy and product-development work.

View specifications

Component & Battery Testing

(11)
HIOKI IM7580 Series High-Frequency Impedance Analyzer
Impedance analyzers & LCR meters

HIOKI IM7580 Series High-Frequency Impedance Analyzer

The HIOKI IM7580 series are high-frequency impedance analyzers for inspecting RF inductors, capacitors and EMC components on production lines and in the laboratory. Five models cover measurement frequencies from 100 kHz up to 3 GHz, each working in both impedance analyzer and LCR meter modes. A 0.5 ms analog measurement time, 0.07% typical repeatability, a contact check and five equivalent-circuit analysis models support fast, reliable sorting of common-mode filters, ferrite bead arrays and power inductors.

View specifications
HIOKI IM3590 Chemical Impedance Analyzer
Impedance analyzers & LCR meters

HIOKI IM3590 Chemical Impedance Analyzer

The HIOKI IM3590 is a chemical impedance analyzer for electrochemical impedance spectroscopy of batteries, electrochemical components and materials. It sweeps from 1 mHz to 200 kHz with ±0.05% basic accuracy and uses an automatically adjusted DC bias to measure the internal impedance of battery cells. Cole-Cole plots and equivalent-circuit analysis are built in and shown on the 5.7-inch touch display, giving battery and materials researchers results without external software.

View specifications
HIOKI IM3536 LCR Meter
Impedance analyzers & LCR meters

HIOKI IM3536 LCR Meter

The HIOKI IM3536 is a general-purpose LCR meter that measures from DC and 4 Hz up to 8 MHz with ±0.05% rdg basic accuracy. A 1 ms test time, a built-in contact check and a guaranteed accuracy range starting at 1 mΩ deliver stable, repeatable results for capacitors, inductors, resistors and other electronic components. Its speed and reliability simplify the design of automated production and incoming-inspection lines.

View specifications
HIOKI IM3523 / IM3533 LCR Meter
Impedance analyzers & LCR meters

HIOKI IM3523 / IM3533 LCR Meter

The HIOKI IM3523 and IM3533 are LCR meters with ±0.05% rdg accuracy and a 2 ms measurement time for component testing. The IM3523 (DC, 40 Hz to 200 kHz) is designed for integration into production lines and automated test systems. The IM3533 (DC, 1 mHz to 200 kHz) adds transformer measurements such as turn ratio, mutual inductance and inductance difference, with temperature-compensated DCR, for winding and coil production, R&D and electrochemical applications.

View specifications
HIOKI RM2610 Electrode Resistance Measurement System
Resistance meters

HIOKI RM2610 Electrode Resistance Measurement System

The HIOKI RM2610 is an electrode resistance measurement system for lithium-ion battery research and process control. It separates and quantifies the composite layer resistivity (Ω·cm) and the interface resistance between the composite layer and the current collector (Ω·cm²) of an electrode sheet. This gives battery manufacturers and laboratories a direct way to evaluate electrode formulations, coating and calendering conditions before cells are assembled.

View specifications
HIOKI RM3544 / RM3545 DC Resistance Meter
Resistance meters

HIOKI RM3544 / RM3545 DC Resistance Meter

The HIOKI RM3544 and RM3545 are benchtop DC resistance meters for high-accuracy low-resistance testing. The RM3545 measures from 10 mΩ to 1000 MΩ ranges with 0.01 µΩ resolution at 2.2 ms, and accepts the Z3003 multiplexer unit for high-speed multi-point testing. The RM3544 covers 30 mΩ to 3 MΩ ranges with temperature correction for fast production-line checks of windings, contacts, welds, fuses and busbars.

View specifications
HIOKI RM3548 Portable Low Resistance Meter
Resistance meters

HIOKI RM3548 Portable Low Resistance Meter

The HIOKI RM3548 is a portable micro-ohmmeter for maintenance and acceptance testing of large electrical equipment. It offers 0.02% basic accuracy, 0.1 µΩ best resolution, a 1 A maximum test current and ranges up to 3.5 MΩ, and stores up to 1000 readings for later reporting. Technicians use it on site to check motor and transformer windings, busbar and cable joints, earth bonding and welded connections.

View specifications
HIOKI BT4560 Battery Impedance Meter
Battery testers

HIOKI BT4560 Battery Impedance Meter

The HIOKI BT4560 battery impedance meter judges the quality of lithium-ion cells in about 10 seconds using low-frequency AC-IR measurement. By varying the measurement frequency from 0.1 Hz to 1050 Hz, it captures both electrolyte resistance and reaction resistance, offering a fast alternative to charge/discharge DC-IR testing. It measures impedance and voltage at the same time, accepts cells up to 5 V and comes with software for Cole-Cole plots, making it suited to cell grading, incoming inspection and second-life battery evaluation.

View specifications
HIOKI BT3561A / BT3562A / BT3563A / BT3564 Battery HiTester
Battery testers

HIOKI BT3561A / BT3562A / BT3563A / BT3564 Battery HiTester

The HIOKI BT356xA series and BT3564 Battery HiTesters measure internal resistance and voltage of cells, modules and packs on production and inspection lines. Models are matched to the battery voltage, from small cells and 60 V packs up to 1000 V packs for electric vehicles and energy storage systems. Higher tolerance to line resistance, standard LAN and improved electrostatic and noise resistance make automatic battery test systems easier to design and more stable in operation.

View specifications
HIOKI BT3554 Portable Battery Tester
Battery testers

HIOKI BT3554 Portable Battery Tester

The HIOKI BT3554 is a portable battery tester for diagnosing UPS and stationary lead-acid batteries without taking them offline. It measures and saves internal resistance and voltage in about 2 seconds, and its comparator gives an immediate pass, warning or fail judgment for each cell. Measurement and recording guidance speeds up rounds in battery rooms, and the optional Z3210 wireless adapter sends results to a phone or tablet for reporting in data centers, telecom sites and substations.

View specifications
HIOKI ST4030A Impulse Winding Tester
Impulse winding testers

HIOKI ST4030A Impulse Winding Tester

The HIOKI ST4030A impulse winding tester (surge tester) diagnoses the insulation quality of motor windings, including rotors and stators in their assembled state. Instead of comparing waveform areas, it quantifies the response waveform as LC and RC values, which reveals single-turn faults that conventional testers miss. With 200 MHz sampling at 12-bit resolution, up to 4200 V applied voltage and an optional partial discharge detection function, it serves motor production lines and rewinding workshops.

View specifications

Electrical Safety & Field Testers

(24)
HIOKI ST5540 / ST5541 Leak Current HiTester
Safety testers

HIOKI ST5540 / ST5541 Leak Current HiTester

The HIOKI ST5540 and ST5541 are leakage current testers for electrical safety compliance. The ST5540 covers medical electrical equipment to IEC 60601-1, including patient leakage current, and the ST5541 addresses general electrical equipment to standards such as IEC 60990, IEC 60950-1 and IEC 60335-1. Uninterrupted polarity switching, support for rated currents up to 20 A, and USB and external I/O interfaces enable automatic leakage testing on production lines and in test laboratories.

View specifications
HIOKI ST5520 Production-Line Insulation Tester
Safety testers

HIOKI ST5520 Production-Line Insulation Tester

The HIOKI ST5520 is a benchtop insulation resistance tester built for high-throughput production lines, with a test time as short as 50 ms. The test voltage is freely set from 25 V to 1000 V, and high-speed automatic discharge shortens each cycle. Contact check and short-circuit check functions prevent false passes caused by poor probing, which matters when testing batteries, capacitors, motors and wiring assemblies at speed.

View specifications
HIOKI 3153 / 3174 Automatic Insulation / Withstanding HiTester
Safety testers

HIOKI 3153 / 3174 Automatic Insulation / Withstanding HiTester

The HIOKI 3153 and 3174 are automatic hipot testers that combine withstand voltage (dielectric strength) and insulation resistance tests in one electrical safety instrument. They apply up to 5 kV at 500 VA and test insulation resistance from 50 V to 1200 V DC in 1 V steps. Full PC remote control and 32 programmable test settings support repeatable end-of-line safety testing of appliances, power supplies and electrical assemblies.

View specifications
HIOKI IR4057-50 Digital Insulation Tester
Insulation testers

HIOKI IR4057-50 Digital Insulation Tester

The HIOKI IR4057-50 is a digital insulation tester (megohmmeter) with five test ranges from 50 V / 100 MΩ to 1000 V / 4000 MΩ. A 0.3-second pass/fail decision, a bright LED backlight and automatic AC/DC voltage detection speed up periodic inspection of low-voltage installations, panels, motors and cables. It is CAT III 600 V rated and EN 61557 compliant, and sends readings wirelessly when the Z3210 adapter is fitted.

View specifications
HIOKI 3490 Analog MΩ HiTester
Insulation testers

HIOKI 3490 Analog MΩ HiTester

The HIOKI 3490 is an analog insulation resistance tester for electricians who prefer a needle display to follow insulation behaviour during the test. It provides three ranges from 250 V / 100 MΩ to 1000 V / 4000 MΩ, measures AC voltage, and comes in a convenient integrated case that holds the test leads. With CAT III 600 V safety and EN 61557 compliance, it is a dependable megger-type tester for building and plant maintenance.

View specifications
HIOKI IR4053 Insulation Tester for PV Systems
Insulation testers

HIOKI IR4053 Insulation Tester for PV Systems

The HIOKI IR4053 is an insulation resistance meter and photovoltaic panel insulation tester in one unit. Its PV mode measures the insulation of solar strings accurately in daylight without short-circuiting the array, in line with the method described in IEC 62446, and displays the result in about 4 seconds. Five test ranges from 50 V / 100 MΩ to 1000 V / 4000 MΩ also cover conventional installations, making it a practical tool for solar plant commissioning and O&M teams.

View specifications
HIOKI IR3455 5 kV High-Voltage Insulation Tester
Insulation testers

HIOKI IR3455 5 kV High-Voltage Insulation Tester

The HIOKI IR3455 is a 5 kV insulation tester for high-voltage equipment such as transformers, cables and motors. It applies test voltages from 250 V to 5.00 kV DC, measures insulation resistance up to 10 TΩ and automatically calculates the polarization index (PI) and dielectric absorption ratio (DAR). Data memory reduces handwritten notes, and an operating range of -10 °C to 50 °C suits substation and plant diagnostics in the field.

View specifications
HIOKI 3280-10F / 3280-20F Pocket AC Clamp Meter
Clamp meters

HIOKI 3280-10F / 3280-20F Pocket AC Clamp Meter

The HIOKI 3280-10F and 3280-20F are pocket-size AC clamp meters only 16 mm thin for everyday electrical work. They measure AC current from the 42.00 A range up to 1000 A through a 33 mm jaw, plus AC/DC voltage and resistance, and accept an optional flexible clamp sensor for large or crowded conductors. Choose the 3280-10F for mean-value rectified readings or the 3280-20F for True RMS on distorted waveforms.

View specifications
HIOKI CM3289 True RMS AC Clamp Meter
Clamp meters

HIOKI CM3289 True RMS AC Clamp Meter

The HIOKI CM3289 is a slim True RMS AC clamp meter with a redesigned sensor that clamps more easily around cables in crowded panels. True RMS measurement captures harmonic waveform components correctly on non-linear loads, and the -25 °C to 65 °C operating range handles outdoor and plant conditions. Connect the CT6280 flexible sensor to measure up to 4199 A on thick or paired conductors.

View specifications
HIOKI CM4141-50 2000 A AC Clamp Meter
Clamp meters

HIOKI CM4141-50 2000 A AC Clamp Meter

The HIOKI CM4141-50 is a 2000 A AC clamp meter with a thin jaw tip, just 11 mm at its narrowest cross-section, that slips between tightly packed cables. It works from -25 °C to 65 °C for demanding sites and sends measurements to a smartphone or tablet when the Z3210 wireless adapter is connected. It suits electricians and maintenance engineers working on main distribution boards, feeders and large motors.

View specifications
HIOKI CM4375-50 1000 A AC/DC Clamp Meter
Clamp meters

HIOKI CM4375-50 1000 A AC/DC Clamp Meter

The HIOKI CM4375-50 is a 1000 A AC/DC clamp meter with a thin sensor structure for tight cable spaces. Automatic AC/DC detection saves time, and inrush current is captured in RMS and crest values simultaneously for motor starting and inverter work. Rated from -25 °C to 65 °C with a 3-year guarantee, it also supports wireless reporting through the Z3210 adapter, which is useful on solar DC circuits, battery systems and EV equipment.

View specifications
HIOKI CM4002 / CM4003 AC Leakage Clamp Meter
Clamp meters

HIOKI CM4002 / CM4003 AC Leakage Clamp Meter

The HIOKI CM4002 and CM4003 are AC leakage clamp meters for finding earth leakage and nuisance RCD tripping without interrupting the circuit. Six ranges span 0.060 mA to 200.0 A AC with True RMS measurement, and the jaw accepts conductors up to 40 mm. The CM4003 adds an external output and external power supply for long-term recording of intermittent leakage; both support wireless communication with the Z3210 adapter.

View specifications
HIOKI CM3286-50 AC Clamp Power Meter
Clamp meters

HIOKI CM3286-50 AC Clamp Power Meter

The HIOKI CM3286-50 is a handheld AC clamp power meter that shows four parameters at once for quick on-site power checks. It measures from 5 W at only 60 mA up to 360 kW, and adds simple integrated energy consumption and phase sequence detection to current, voltage and power readings. With Z3210 wireless communication, it is an efficient tool for energy surveys, equipment commissioning and verifying single-phase and three-phase loads.

View specifications
HIOKI PD3259-50 Digital Phase Detector
Phase detectors

HIOKI PD3259-50 Digital Phase Detector

The HIOKI PD3259-50 is a digital phase detector that checks three-phase sequence and line-to-line voltage at the same time, using non-metallic contact sensing. The clips attach over the wire insulation, so there is no exposed metal near live terminals. A backlit display and buzzer make the phase rotation result clear in dim switch rooms, and readings can be sent wirelessly with the Z3210 adapter when commissioning motors, pumps and distribution boards.

View specifications
HIOKI PD3129-10 Phase Detector
Phase detectors

HIOKI PD3129-10 Phase Detector

The HIOKI PD3129-10 is a non-contact phase rotation tester for three-phase power supplies. Clip the three clamps onto the insulated wires and a rotating LED indicator shows the phase sequence at a glance, with a green arrow giving the direction for photos and visual reports. Intermittent beeps confirm positive phase and a continuous tone warns of reverse phase, so installers can verify motor and equipment connections quickly and safely.

View specifications
HIOKI FT3424 / FT3425 Lux Meter
Lux meters & PV testers

HIOKI FT3424 / FT3425 Lux Meter

The HIOKI FT3424 and FT3425 are lux meters for measuring illuminance in workplaces, factories, roads and public buildings, including LED lighting. They comply with DIN 5032-7:1985 class B and JIS C 1609-1:2006 general AA class for dependable lighting audits. A timer hold function lets the operator step away before the reading is taken, avoiding shadows and reflections, and the FT3425 adds Bluetooth® wireless data transfer.

View specifications
HIOKI FT4310 Bypass Diode Tester for Solar Panels
Lux meters & PV testers

HIOKI FT4310 Bypass Diode Tester for Solar Panels

The HIOKI FT4310 bypass diode tester inspects the bypass diodes of solar panels for open and short-circuit faults, even in broad daylight and without covering the modules. In a single test it measures open-circuit voltage, short-circuit current and bypass route resistance of the string. Built-in Bluetooth® transfers the data to create reports on the spot, helping PV operation and maintenance teams locate failed diodes that cause hot spots and yield loss.

View specifications
HIOKI DT4220 Series Pocket Digital Multimeter
Digital multimeters

HIOKI DT4220 Series Pocket Digital Multimeter

The HIOKI DT4220 series are pocket digital multimeters that bring CAT IV 300 V / CAT III 600 V safety to a compact, shirt-pocket format. They are designed for electricians who need a dependable DMM for voltage checks, continuity and basic troubleshooting on low-voltage installations without carrying a full-size meter. Several models in the series are tailored to electrical work, HVAC and general maintenance.

View specifications
HIOKI DT4250 Series Digital Multimeter
Digital multimeters

HIOKI DT4250 Series Digital Multimeter

The HIOKI DT4250 series are standard handheld digital multimeters that deliver top safety and reliability for professional use. These general-purpose DMMs offer a rich set of measurement functions for electrical contractors, plant maintenance and instrumentation technicians, with models oriented to different tasks such as power-line work, control signals and electrical construction. They are a solid everyday choice for troubleshooting panels, drives and machinery.

View specifications
HIOKI DT4261 Digital Multimeter
Digital multimeters

HIOKI DT4261 Digital Multimeter

The HIOKI DT4261 is a field digital multimeter designed for trouble analysis on site. Fit the optional Z3210 wireless adapter and readings transfer to a smartphone or tablet, so results can be logged and reported without writing them down. It gives maintenance and commissioning engineers a capable DMM for diagnosing electrical faults on equipment, solar installations and industrial control systems.

View specifications
HIOKI DT4280 Series High-Accuracy Digital Multimeter
Digital multimeters

HIOKI DT4280 Series High-Accuracy Digital Multimeter

The HIOKI DT4280 series are high-end handheld digital multimeters offering superior accuracy and fast response for demanding measurement work. Safety terminal shutters block the unused input terminals to prevent incorrect test-lead connection, a common cause of meter accidents. They suit engineers in R&D, calibration support and industrial maintenance who need bench-class precision in a portable instrument.

View specifications
HIOKI FT6380-50 Clamp-On Earth Tester
Earth testers

HIOKI FT6380-50 Clamp-On Earth Tester

The HIOKI FT6380-50 is a clamp-on earth tester that measures grounding resistance on multi-grounded systems without auxiliary rods and without disconnecting the earth conductor. Its jaw is among the thinnest and lightest in the industry, which helps in crowded earthing pits and cable trays. True RMS current measurement, CAT IV 600 V safety, memory for 2000 readings and optional Z3210 wireless reporting make it efficient for periodic earthing inspections on substations, towers and buildings.

View specifications
HIOKI FT6031-50 Earth Tester
Earth testers

HIOKI FT6031-50 Earth Tester

The HIOKI FT6031-50 is a digital earth resistance tester for 2-pole and 3-pole measurements on electrical installations. With an IP67 dustproof and waterproof housing that can be fully submerged, it keeps working in rain, mud and trenches. Three ranges from 20.00 Ω to 2000 Ω, automatic cable-break checking and EN 61557 compliance support reliable earthing verification, and results transfer wirelessly with the Z3210 adapter.

View specifications
HIOKI FT3151 Analog Earth Tester
Earth testers

HIOKI FT3151 Analog Earth Tester

The HIOKI FT3151 is an analog earth tester for two-electrode and three-electrode grounding resistance measurements. It covers a wide 0 to 1150 Ω range based on the EN standard, and a switchable measurement frequency reduces the influence of power supply harmonics on the reading. Improved grounding rods and cord winders make setup dramatically faster, which electricians value when testing many earth electrodes in a day.

View specifications

Product enquiry

Need help choosing an electrical test instrument?

Share the equipment under test, the quantities to measure, voltage and current levels, required accuracy and any standard you must meet. We can discuss suitable HIOKI models and accessories for a quotation.

HIOKI Electrical Test & Measurement Instruments in Morocco | Neodyn Group