Electrical test & measurement

HIOKI FT6031-50 Earth Tester

The HIOKI FT6031-50 is a digital earth resistance tester for 2-pole and 3-pole measurements on electrical installations.

Brand
HIOKI
Reference
FT6031-50
Datasheet
PDF by email
Supply
Morocco & Africa

Description

The HIOKI FT6031-50 is a digital earth resistance tester for 2-pole and 3-pole measurements on electrical installations. With an IP67 dustproof and waterproof housing that can be fully submerged, it keeps working in rain, mud and trenches. Three ranges from 20.00 Ω to 2000 Ω, automatic cable-break checking and EN 61557 compliance support reliable earthing verification, and results transfer wirelessly with the Z3210 adapter.

At a glance

Methods
2-pole and 3-pole measurement
Ranges
3 ranges, 20.00 Ω to 2000 Ω
Protection
IP67 dustproof and waterproof, completely submersible

Additional technical specifications

Use these listed characteristics as a starting point. Confirm the final specification for your chosen configuration.

Standard
EN 61557 compliant
Safety
CAT II 300 V / CAT III 150 V
Checks
Automatic cable-break detection
Wireless
Wireless communication when the Z3210 adapter is connected
Back to product enquiry
HIOKI FT6031-50 Earth Tester – Earth testers
Electrical Safety & Field Testers · Earth testers

Compare other instruments in our catalog before defining your requirements.

Explore this category
HIOKI FT6380-50 Clamp-On Earth Tester

Electrical test & measurement

HIOKI FT6380-50 Clamp-On Earth Tester

The HIOKI FT6380-50 is a clamp-on earth tester that measures grounding resistance on multi-grounded systems without auxiliary rods and without disconnecting the earth conductor. Its jaw is among the thinnest and lightest in the industry, which helps in crowded earthing pits and cable trays. True RMS current measurement, CAT IV 600 V safety, memory for 2000 readings and optional Z3210 wireless reporting make it efficient for periodic earthing inspections on substations, towers and buildings.

View product
HIOKI ST5540 / ST5541 Leak Current HiTester

Electrical test & measurement

HIOKI ST5540 / ST5541 Leak Current HiTester

The HIOKI ST5540 and ST5541 are leakage current testers for electrical safety compliance. The ST5540 covers medical electrical equipment to IEC 60601-1, including patient leakage current, and the ST5541 addresses general electrical equipment to standards such as IEC 60990, IEC 60950-1 and IEC 60335-1. Uninterrupted polarity switching, support for rated currents up to 20 A, and USB and external I/O interfaces enable automatic leakage testing on production lines and in test laboratories.

View product
HIOKI ST5520 Production-Line Insulation Tester

Electrical test & measurement

HIOKI ST5520 Production-Line Insulation Tester

The HIOKI ST5520 is a benchtop insulation resistance tester built for high-throughput production lines, with a test time as short as 50 ms. The test voltage is freely set from 25 V to 1000 V, and high-speed automatic discharge shortens each cycle. Contact check and short-circuit check functions prevent false passes caused by poor probing, which matters when testing batteries, capacitors, motors and wiring assemblies at speed.

View product

Need help with the right configuration?

Share your measurement requirements and site conditions. We can review the product configuration with you before preparing a quotation.

Request a quotation