Electrical test & measurement

HIOKI IM3523 / IM3533 LCR Meter

The HIOKI IM3523 and IM3533 are LCR meters with ±0.05% rdg accuracy and a 2 ms measurement time for component testing.

Brand
HIOKI
Reference
IM3523 / IM3533
Datasheet
PDF by email
Supply
Morocco & Africa

Description

The HIOKI IM3523 and IM3533 are LCR meters with ±0.05% rdg accuracy and a 2 ms measurement time for component testing. The IM3523 (DC, 40 Hz to 200 kHz) is designed for integration into production lines and automated test systems. The IM3533 (DC, 1 mHz to 200 kHz) adds transformer measurements such as turn ratio, mutual inductance and inductance difference, with temperature-compensated DCR, for winding and coil production, R&D and electrochemical applications.

At a glance

Measurement frequency
IM3533: DC, 1 mHz to 200 kHz; IM3523: DC, 40 Hz to 200 kHz
Basic accuracy
±0.05% rdg
Measurement speed
2 ms

Additional technical specifications

Use these listed characteristics as a starting point. Confirm the final specification for your chosen configuration.

Transformer functions (IM3533)
Turn ratio N, mutual inductance M, inductance difference ΔL, DCR with temperature compensation
Key applications
Capacitors, inductors, resistors and electronic parts; coil and transformer production lines; automated testing

Available Models

Model options differ by configuration and application. Include the model reference in your enquiry if you have one.

ModelDescription
IM3523DC, 40 Hz to 200 kHz — production lines and automated testing
IM3533DC, 1 mHz to 200 kHz — transformer, coil, R&D and electrochemical measurements
Back to product enquiry
HIOKI IM3523 / IM3533 LCR Meter – Impedance analyzers & LCR meters
Component & Battery Testing · Impedance analyzers & LCR meters

Compare other instruments in our catalog before defining your requirements.

Explore this category
HIOKI IM7580 Series High-Frequency Impedance Analyzer

Electrical test & measurement

HIOKI IM7580 Series High-Frequency Impedance Analyzer

The HIOKI IM7580 series are high-frequency impedance analyzers for inspecting RF inductors, capacitors and EMC components on production lines and in the laboratory. Five models cover measurement frequencies from 100 kHz up to 3 GHz, each working in both impedance analyzer and LCR meter modes. A 0.5 ms analog measurement time, 0.07% typical repeatability, a contact check and five equivalent-circuit analysis models support fast, reliable sorting of common-mode filters, ferrite bead arrays and power inductors.

View product
HIOKI IM3590 Chemical Impedance Analyzer

Electrical test & measurement

HIOKI IM3590 Chemical Impedance Analyzer

The HIOKI IM3590 is a chemical impedance analyzer for electrochemical impedance spectroscopy of batteries, electrochemical components and materials. It sweeps from 1 mHz to 200 kHz with ±0.05% basic accuracy and uses an automatically adjusted DC bias to measure the internal impedance of battery cells. Cole-Cole plots and equivalent-circuit analysis are built in and shown on the 5.7-inch touch display, giving battery and materials researchers results without external software.

View product
HIOKI RM2610 Electrode Resistance Measurement System

Electrical test & measurement

HIOKI RM2610 Electrode Resistance Measurement System

The HIOKI RM2610 is an electrode resistance measurement system for lithium-ion battery research and process control. It separates and quantifies the composite layer resistivity (Ω·cm) and the interface resistance between the composite layer and the current collector (Ω·cm²) of an electrode sheet. This gives battery manufacturers and laboratories a direct way to evaluate electrode formulations, coating and calendering conditions before cells are assembled.

View product

Need help with the right configuration?

Share your measurement requirements and site conditions. We can review the product configuration with you before preparing a quotation.

Request a quotation