Electrical test & measurement

HIOKI PD3129-10 Phase Detector

The HIOKI PD3129-10 is a non-contact phase rotation tester for three-phase power supplies.

Brand
HIOKI
Reference
PD3129-10
Datasheet
PDF by email
Supply
Morocco & Africa

Description

The HIOKI PD3129-10 is a non-contact phase rotation tester for three-phase power supplies. Clip the three clamps onto the insulated wires and a rotating LED indicator shows the phase sequence at a glance, with a green arrow giving the direction for photos and visual reports. Intermittent beeps confirm positive phase and a continuous tone warns of reverse phase, so installers can verify motor and equipment connections quickly and safely.

At a glance

Detection method
Clamps clip onto wire insulation (non-contact)
Indication
Rotating LED indicator and green LED arrow for phase direction
Audible signal
Intermittent beeps for positive phase; continuous tone for reverse phase

Additional technical specifications

Use these listed characteristics as a starting point. Confirm the final specification for your chosen configuration.

Key applications
Phase sequence checks on three-phase power supplies
Back to product enquiry
HIOKI PD3129-10 Phase Detector – Phase detectors
Electrical Safety & Field Testers · Phase detectors

Compare other instruments in our catalog before defining your requirements.

Explore this category
HIOKI PD3259-50 Digital Phase Detector

Electrical test & measurement

HIOKI PD3259-50 Digital Phase Detector

The HIOKI PD3259-50 is a digital phase detector that checks three-phase sequence and line-to-line voltage at the same time, using non-metallic contact sensing. The clips attach over the wire insulation, so there is no exposed metal near live terminals. A backlit display and buzzer make the phase rotation result clear in dim switch rooms, and readings can be sent wirelessly with the Z3210 adapter when commissioning motors, pumps and distribution boards.

View product
HIOKI ST5540 / ST5541 Leak Current HiTester

Electrical test & measurement

HIOKI ST5540 / ST5541 Leak Current HiTester

The HIOKI ST5540 and ST5541 are leakage current testers for electrical safety compliance. The ST5540 covers medical electrical equipment to IEC 60601-1, including patient leakage current, and the ST5541 addresses general electrical equipment to standards such as IEC 60990, IEC 60950-1 and IEC 60335-1. Uninterrupted polarity switching, support for rated currents up to 20 A, and USB and external I/O interfaces enable automatic leakage testing on production lines and in test laboratories.

View product
HIOKI ST5520 Production-Line Insulation Tester

Electrical test & measurement

HIOKI ST5520 Production-Line Insulation Tester

The HIOKI ST5520 is a benchtop insulation resistance tester built for high-throughput production lines, with a test time as short as 50 ms. The test voltage is freely set from 25 V to 1000 V, and high-speed automatic discharge shortens each cycle. Contact check and short-circuit check functions prevent false passes caused by poor probing, which matters when testing batteries, capacitors, motors and wiring assemblies at speed.

View product
HIOKI 3153 / 3174 Automatic Insulation / Withstanding HiTester

Electrical test & measurement

HIOKI 3153 / 3174 Automatic Insulation / Withstanding HiTester

The HIOKI 3153 and 3174 are automatic hipot testers that combine withstand voltage (dielectric strength) and insulation resistance tests in one electrical safety instrument. They apply up to 5 kV at 500 VA and test insulation resistance from 50 V to 1200 V DC in 1 V steps. Full PC remote control and 32 programmable test settings support repeatable end-of-line safety testing of appliances, power supplies and electrical assemblies.

View product

Need help with the right configuration?

Share your measurement requirements and site conditions. We can review the product configuration with you before preparing a quotation.

Request a quotation