Electrical test & measurement

HIOKI SP3000 / SP7000 Non-Contact AC Voltage & CAN Sensors

The HIOKI SP3000 and SP7000 are non-contact sensors that read signals through the wire insulation, without stripping or piercing the cable.

Brand
HIOKI
Reference
SP3000 / SP7000
Datasheet
PDF by email
Supply
Morocco & Africa

Description

The HIOKI SP3000 and SP7000 are non-contact sensors that read signals through the wire insulation, without stripping or piercing the cable. The SP7000 senses CAN and CAN FD bus signals precisely over the insulation, and the SP3000 lets you observe AC voltage waveforms on an oscilloscope or recorder simply by clipping the probe onto the conductor. Their slim design reaches difficult areas of a wiring harness, which makes them practical for vehicle electrical development and diagnostics.

At a glance

Measurement principle
Non-contact sensing on the insulated conductor
SP7000
Precise CAN FD and CAN signal sensing over the cable insulation
SP3000
AC voltage waveform observation with an oscilloscope or recorder

Additional technical specifications

Use these listed characteristics as a starting point. Confirm the final specification for your chosen configuration.

Design
Functional probe shape for hard-to-access areas
Key applications
Signals from electric equipment on vehicles, wiring-harness measurements

Available Models

Model options differ by configuration and application. Include the model reference in your enquiry if you have one.

ModelDescription
SP3000Non-contact AC voltage probe for oscilloscopes and recorders
SP7000 (SP7001-90)Non-contact CAN / CAN FD sensor set
Back to product enquiry
HIOKI SP3000 / SP7000 Non-Contact AC Voltage & CAN Sensors – Memory recorders
Recorders & Data Loggers · Memory recorders

Compare other instruments in our catalog before defining your requirements.

Explore this category
HIOKI MR6000 Memory HiCorder

Electrical test & measurement

HIOKI MR6000 Memory HiCorder

The HIOKI MR6000 Memory HiCorder is a high-speed waveform recorder with isolated inputs for inverter, ECU and power-electronics testing. It samples at 200 MS/s, records up to 32 channels simultaneously and saves 1 MS/s data on all channels to SSD in real time for long-duration tests. A 12.1-inch touchscreen and mixed inputs for voltage, current, temperature, vibration and logic signals make it a complete data acquisition recorder for R&D laboratories and commissioning teams.

View product
HIOKI MR8827 Memory HiCorder

Electrical test & measurement

HIOKI MR8827 Memory HiCorder

The HIOKI MR8827 Memory HiCorder is a multi-channel waveform recorder built for power generation and utility testing. It records from 32 analog plus 32 logic channels up to 28 analog plus 64 logic channels, samples all channels simultaneously at up to 20 MS/s and isolates every input for safe measurement. With 512 MW of built-in memory, it captures the signals of several systems at once during commissioning and fault investigation in thermal, hydro, solar and wind plants.

View product
HIOKI MR8847A Memory HiCorder

Electrical test & measurement

HIOKI MR8847A Memory HiCorder

The HIOKI MR8847A Memory HiCorder combines waveform recording with waveform generation for simulation testing. Fitted with the U8793 arbitrary waveform generator unit, it can replay recorded disturbances to test equipment response, while 20 MS/s simultaneous sampling and fully isolated inputs handle demanding electrical measurements. It is widely used for heavy electromechanical work on motors, transformers, inverters, UPS systems and switching power supplies, with a built-in printer for on-site reports.

View product

Need help with the right configuration?

Share your measurement requirements and site conditions. We can review the product configuration with you before preparing a quotation.

Request a quotation