Electrical test & measurement

HIOKI Pass-Through AC/DC Current Sensors (CT6862 to CT6904A)

HIOKI pass-through current sensors are high-accuracy AC/DC zero-flux sensors for power analyzers and memory recorders.

Brand
HIOKI
Reference
CT686x / CT687x / CT6904A
Datasheet
PDF by email
Supply
Morocco & Africa

Description

HIOKI pass-through current sensors are high-accuracy AC/DC zero-flux sensors for power analyzers and memory recorders. The range covers rated currents from 50 A to 2000 A, with bandwidths up to DC to 10 MHz and amplitude accuracy from ±0.02% rdg, so one family serves inverter development, EV drive testing and high-current power conversion. Most models support automatic phase correction with the PW8001, and 3 m or 10 m cable versions suit test benches and climate chambers.

At a glance

Sensor type
Pass-through (closed-core) AC/DC current sensor
Rated primary current
50 A, 200 A, 500 A, 800 A, 1000 A or 2000 A rms
Frequency range
DC to 1 MHz up to DC to 10 MHz, depending on model

Additional technical specifications

Use these listed characteristics as a starting point. Confirm the final specification for your chosen configuration.

Amplitude accuracy (50/60 Hz)
From ±0.02% rdg ±0.007% f.s.
Measurable conductor diameter
24 mm, 32 mm, 36 mm or 80 mm
Cable length
3 m or 10 m
Operating temperature
-40 °C to 85 °C (CT6904A series: -10 °C to 50 °C)

Available Models

Model options differ by configuration and application. Include the model reference in your enquiry if you have one.

ModelDescription
CT6862-0550 A, DC to 1 MHz, ±0.05% rdg ±0.01% f.s., φ24 mm, 3 m cable
CT6872 / CT6872-0150 A, DC to 10 MHz, ±0.03% rdg ±0.007% f.s., φ24 mm, 3 m / 10 m cable
CT6863-05200 A, DC to 500 kHz, ±0.05% rdg ±0.01% f.s., φ24 mm, 3 m cable
CT6873 / CT6873-01200 A, DC to 10 MHz, ±0.03% rdg ±0.007% f.s., φ24 mm, 3 m / 10 m cable
CT6875A / CT6875A-1500 A, DC to 2 MHz (1.5 MHz with 10 m cable), ±0.04% rdg ±0.008% f.s., φ36 mm
CT6904A / CT6904A-1500 A, DC to 4 MHz (2 MHz with 10 m cable), ±0.02% rdg ±0.007% f.s., φ32 mm
CT6904A-2 / CT6904A-3800 A, DC to 4 MHz (2 MHz with 10 m cable), ±0.025% rdg ±0.009% f.s., φ32 mm
CT6876A / CT6876A-11000 A, DC to 1.5 MHz (1.2 MHz with 10 m cable), ±0.04% rdg ±0.008% f.s., φ36 mm
CT6877A / CT6877A-12000 A, DC to 1 MHz, ±0.04% rdg ±0.008% f.s., φ80 mm, 3 m / 10 m cable
Back to product enquiry
HIOKI Pass-Through AC/DC Current Sensors (CT6862 to CT6904A) – Current sensors
Power & Energy Analysis · Current sensors

Compare other instruments in our catalog before defining your requirements.

Explore this category
HIOKI Clamp-Type AC/DC Current Sensors (CT6841A to CT6846A, 9272-05)

Electrical test & measurement

HIOKI Clamp-Type AC/DC Current Sensors (CT6841A to CT6846A, 9272-05)

HIOKI clamp-type current sensors let you measure AC/DC current for power analysis without disconnecting the conductor. The CT6841A to CT6846A probes cover 20 A to 1000 A with ±0.2% rdg accuracy and bandwidths up to DC to 2 MHz, while the 9272-05 clamp handles AC measurement at 20 A or 200 A. With a -40 °C to 85 °C operating range and automatic phase correction on the PW8001, they suit in-vehicle wiring, installed inverters and field commissioning where a pass-through sensor cannot be fitted.

View product
HIOKI PW9100A Direct-Wired AC/DC Current Box

Electrical test & measurement

HIOKI PW9100A Direct-Wired AC/DC Current Box

The HIOKI PW9100A is a direct-wired AC/DC current box for the highest-accuracy power measurements at up to 50 A. Wiring the conductor to its M6 screw terminals gives ±0.02% rdg accuracy across a DC to 3.5 MHz bandwidth, which makes it suited to efficiency testing of low-current converters, power supplies and reactor loss evaluation. It is available with 3 or 4 channels and supports automatic phase correction when used with the PW8001 power analyzer.

View product
HIOKI PW8001 Power Analyzer

Electrical test & measurement

HIOKI PW8001 Power Analyzer

The HIOKI PW8001 is a high-precision power analyzer for inverter, motor and power-conversion efficiency testing. With ±0.03% basic power accuracy, up to 8 modular channels, 15 MS/s sampling and a DC to 5 MHz bandwidth, it measures SiC and GaN converters, EV dual-inverter drives, solar inverters and energy-storage systems on one instrument. Automatic phase shift correction (APSC) keeps high-current, high-frequency measurements accurate. Neodyn Group supplies the PW8001 in Morocco with the input units and current sensors matched to your test bench.

View product
HIOKI PW6001 Power Analyzer

Electrical test & measurement

HIOKI PW6001 Power Analyzer

The HIOKI PW6001 power analyzer delivers ±0.02% basic accuracy for measuring high-efficiency inverters and motors. Six power channels, 5 MS/s sampling with 18-bit resolution and a DC to 2 MHz bandwidth capture input, output and loss in a single test, while harmonic analysis to the 100th order, FFT and user-defined calculations support R&D work. It is a strong choice for motor-drive, EV powertrain and power-electronics laboratories that need traceable efficiency figures.

View product

Need help with the right configuration?

Share your measurement requirements and site conditions. We can review the product configuration with you before preparing a quotation.

Request a quotation