HIOKI Clamp-Type AC/DC Current Sensors (CT6841A to CT6846A, 9272-05)
HIOKI clamp-type current sensors let you measure AC/DC current for power analysis without disconnecting the conductor.
- Brand
- HIOKI
- Reference
- CT684xA / 9272-05
- Datasheet
- PDF by email
- Supply
- Morocco & Africa
Description
HIOKI clamp-type current sensors let you measure AC/DC current for power analysis without disconnecting the conductor. The CT6841A to CT6846A probes cover 20 A to 1000 A with ±0.2% rdg accuracy and bandwidths up to DC to 2 MHz, while the 9272-05 clamp handles AC measurement at 20 A or 200 A. With a -40 °C to 85 °C operating range and automatic phase correction on the PW8001, they suit in-vehicle wiring, installed inverters and field commissioning where a pass-through sensor cannot be fitted.
At a glance
- Sensor type
- Clamp-on AC/DC current sensor (9272-05: AC)
- Rated primary current
- 20 A, 200 A, 500 A or 1000 A rms
- Frequency range
- DC to 100 kHz up to DC to 2 MHz, depending on model
Additional technical specifications
Use these listed characteristics as a starting point. Confirm the final specification for your chosen configuration.
- Amplitude accuracy (50/60 Hz)
- ±0.2% rdg ±0.01% f.s. (9272-05: ±0.3% rdg)
- Measurable conductor diameter
- 20 mm, 46 mm or 50 mm
- Cable length
- 3 m
- Operating temperature
- -40 °C to 85 °C (9272-05: 0 °C to 50 °C)
Available Models
Model options differ by configuration and application. Include the model reference in your enquiry if you have one.
| Model | Description |
|---|---|
| 9272-05 | 20 A / 200 A AC, 1 Hz to 100 kHz, ±0.3% rdg ±0.01% f.s., φ46 mm |
| CT6841A | 20 A, DC to 2 MHz, ±0.2% rdg ±0.01% f.s., φ20 mm |
| CT6843A | 200 A, DC to 700 kHz, ±0.2% rdg ±0.01% f.s., φ20 mm |
| CT6844A | 500 A, DC to 500 kHz, ±0.2% rdg ±0.01% f.s., φ20 mm |
| CT6845A | 500 A, DC to 200 kHz, ±0.2% rdg ±0.01% f.s., φ50 mm |
| CT6846A | 1000 A, DC to 100 kHz, ±0.2% rdg ±0.01% f.s., φ50 mm |




