Industrial Product Catalog

Industrial Instrumentation Catalog

Browse industrial sensors and process measurement instruments for level, flow, pressure, temperature and liquid analysis, plus HIOKI electrical test and measurement instruments, in Morocco. Compare models and specifications, then discuss your application with Neodyn Group.

Six product categories
Product specifications
Technical enquiry

Industrial instrumentation and equipment

Explore measurement instruments, control equipment and monitoring solutions for your facility requirements.

Search across names, descriptions and model numbers.

Product filters

Product filters

Measurement category

Showing 121–132 of 143 products

HIOKI ST5520 Production-Line Insulation Tester
Electrical Safety & Field Testers
Electrical test & measurement•Safety testers

HIOKI ST5520 Production-Line Insulation Tester

The HIOKI ST5520 is a benchtop insulation resistance tester built for high-throughput production lines, with a test time as short as 50 ms. The test voltage is freely set from 25 V to 1000 V, and high-speed automatic discharge shortens each cycle. Contact check and short-circuit check functions prevent false passes caused by poor probing, which matters when testing batteries, capacitors, motors and wiring assemblies at speed.

More Details HIOKI ST5520 Production-Line Insulation Tester
HIOKI 3153 / 3174 Automatic Insulation / Withstanding HiTester
Electrical Safety & Field Testers
Electrical test & measurement•Safety testers

HIOKI 3153 / 3174 Automatic Insulation / Withstanding HiTester

The HIOKI 3153 and 3174 are automatic hipot testers that combine withstand voltage (dielectric strength) and insulation resistance tests in one electrical safety instrument. They apply up to 5 kV at 500 VA and test insulation resistance from 50 V to 1200 V DC in 1 V steps. Full PC remote control and 32 programmable test settings support repeatable end-of-line safety testing of appliances, power supplies and electrical assemblies.

Available Models: 2 Variants
31533174
More Details HIOKI 3153 / 3174 Automatic Insulation / Withstanding HiTester
HIOKI IR4057-50 Digital Insulation Tester
Electrical Safety & Field Testers
Electrical test & measurement•Insulation testers

HIOKI IR4057-50 Digital Insulation Tester

The HIOKI IR4057-50 is a digital insulation tester (megohmmeter) with five test ranges from 50 V / 100 MΩ to 1000 V / 4000 MΩ. A 0.3-second pass/fail decision, a bright LED backlight and automatic AC/DC voltage detection speed up periodic inspection of low-voltage installations, panels, motors and cables. It is CAT III 600 V rated and EN 61557 compliant, and sends readings wirelessly when the Z3210 adapter is fitted.

More Details HIOKI IR4057-50 Digital Insulation Tester
HIOKI 3490 Analog MΩ HiTester
Electrical Safety & Field Testers
Electrical test & measurement•Insulation testers

HIOKI 3490 Analog MΩ HiTester

The HIOKI 3490 is an analog insulation resistance tester for electricians who prefer a needle display to follow insulation behaviour during the test. It provides three ranges from 250 V / 100 MΩ to 1000 V / 4000 MΩ, measures AC voltage, and comes in a convenient integrated case that holds the test leads. With CAT III 600 V safety and EN 61557 compliance, it is a dependable megger-type tester for building and plant maintenance.

More Details HIOKI 3490 Analog MΩ HiTester
HIOKI IR4053 Insulation Tester for PV Systems
Electrical Safety & Field Testers
Electrical test & measurement•Insulation testers

HIOKI IR4053 Insulation Tester for PV Systems

The HIOKI IR4053 is an insulation resistance meter and photovoltaic panel insulation tester in one unit. Its PV mode measures the insulation of solar strings accurately in daylight without short-circuiting the array, in line with the method described in IEC 62446, and displays the result in about 4 seconds. Five test ranges from 50 V / 100 MΩ to 1000 V / 4000 MΩ also cover conventional installations, making it a practical tool for solar plant commissioning and O&M teams.

More Details HIOKI IR4053 Insulation Tester for PV Systems
HIOKI IR3455 5 kV High-Voltage Insulation Tester
Electrical Safety & Field Testers
Electrical test & measurement•Insulation testers

HIOKI IR3455 5 kV High-Voltage Insulation Tester

The HIOKI IR3455 is a 5 kV insulation tester for high-voltage equipment such as transformers, cables and motors. It applies test voltages from 250 V to 5.00 kV DC, measures insulation resistance up to 10 TΩ and automatically calculates the polarization index (PI) and dielectric absorption ratio (DAR). Data memory reduces handwritten notes, and an operating range of -10 °C to 50 °C suits substation and plant diagnostics in the field.

More Details HIOKI IR3455 5 kV High-Voltage Insulation Tester
HIOKI 3280-10F / 3280-20F Pocket AC Clamp Meter
Electrical Safety & Field Testers
Electrical test & measurement•Clamp meters

HIOKI 3280-10F / 3280-20F Pocket AC Clamp Meter

The HIOKI 3280-10F and 3280-20F are pocket-size AC clamp meters only 16 mm thin for everyday electrical work. They measure AC current from the 42.00 A range up to 1000 A through a 33 mm jaw, plus AC/DC voltage and resistance, and accept an optional flexible clamp sensor for large or crowded conductors. Choose the 3280-10F for mean-value rectified readings or the 3280-20F for True RMS on distorted waveforms.

Available Models: 2 Variants
3280-10F3280-20F
More Details HIOKI 3280-10F / 3280-20F Pocket AC Clamp Meter
HIOKI CM3289 True RMS AC Clamp Meter
Electrical Safety & Field Testers
Electrical test & measurement•Clamp meters

HIOKI CM3289 True RMS AC Clamp Meter

The HIOKI CM3289 is a slim True RMS AC clamp meter with a redesigned sensor that clamps more easily around cables in crowded panels. True RMS measurement captures harmonic waveform components correctly on non-linear loads, and the -25 °C to 65 °C operating range handles outdoor and plant conditions. Connect the CT6280 flexible sensor to measure up to 4199 A on thick or paired conductors.

More Details HIOKI CM3289 True RMS AC Clamp Meter
HIOKI CM4141-50 2000 A AC Clamp Meter
Electrical Safety & Field Testers
Electrical test & measurement•Clamp meters

HIOKI CM4141-50 2000 A AC Clamp Meter

The HIOKI CM4141-50 is a 2000 A AC clamp meter with a thin jaw tip, just 11 mm at its narrowest cross-section, that slips between tightly packed cables. It works from -25 °C to 65 °C for demanding sites and sends measurements to a smartphone or tablet when the Z3210 wireless adapter is connected. It suits electricians and maintenance engineers working on main distribution boards, feeders and large motors.

More Details HIOKI CM4141-50 2000 A AC Clamp Meter
HIOKI CM4375-50 1000 A AC/DC Clamp Meter
Electrical Safety & Field Testers
Electrical test & measurement•Clamp meters

HIOKI CM4375-50 1000 A AC/DC Clamp Meter

The HIOKI CM4375-50 is a 1000 A AC/DC clamp meter with a thin sensor structure for tight cable spaces. Automatic AC/DC detection saves time, and inrush current is captured in RMS and crest values simultaneously for motor starting and inverter work. Rated from -25 °C to 65 °C with a 3-year guarantee, it also supports wireless reporting through the Z3210 adapter, which is useful on solar DC circuits, battery systems and EV equipment.

More Details HIOKI CM4375-50 1000 A AC/DC Clamp Meter
HIOKI CM4002 / CM4003 AC Leakage Clamp Meter
Electrical Safety & Field Testers
Electrical test & measurement•Clamp meters

HIOKI CM4002 / CM4003 AC Leakage Clamp Meter

The HIOKI CM4002 and CM4003 are AC leakage clamp meters for finding earth leakage and nuisance RCD tripping without interrupting the circuit. Six ranges span 0.060 mA to 200.0 A AC with True RMS measurement, and the jaw accepts conductors up to 40 mm. The CM4003 adds an external output and external power supply for long-term recording of intermittent leakage; both support wireless communication with the Z3210 adapter.

Available Models: 2 Variants
CM4002CM4003
More Details HIOKI CM4002 / CM4003 AC Leakage Clamp Meter
HIOKI CM3286-50 AC Clamp Power Meter
Electrical Safety & Field Testers
Electrical test & measurement•Clamp meters

HIOKI CM3286-50 AC Clamp Power Meter

The HIOKI CM3286-50 is a handheld AC clamp power meter that shows four parameters at once for quick on-site power checks. It measures from 5 W at only 60 mA up to 360 kW, and adds simple integrated energy consumption and phase sequence detection to current, voltage and power readings. With Z3210 wireless communication, it is an efficient tool for energy surveys, equipment commissioning and verifying single-phase and three-phase loads.

More Details HIOKI CM3286-50 AC Clamp Power Meter
Product enquiry

Need an instrument for your process?

Need a level sensor, flowmeter, pressure transmitter, temperature sensor or liquid-analysis instrument? Share the process medium, operating conditions and preferred specifications so we can discuss suitable options.

Industrial Instrumentation Catalog | Neodyn Group — Page 11