Industrial Product Catalog

Industrial Instrumentation Catalog

Browse industrial sensors and process measurement instruments for level, flow, pressure, temperature and liquid analysis, plus HIOKI electrical test and measurement instruments, in Morocco. Compare models and specifications, then discuss your application with Neodyn Group.

Six product categories
Product specifications
Technical enquiry

Industrial instrumentation and equipment

Explore measurement instruments, control equipment and monitoring solutions for your facility requirements.

Search across names, descriptions and model numbers.

Product filters

Product filters

Measurement category

Showing 109–120 of 143 products

HIOKI IM7580 Series High-Frequency Impedance Analyzer
Component & Battery Testing
Electrical test & measurement•Impedance analyzers & LCR meters

HIOKI IM7580 Series High-Frequency Impedance Analyzer

The HIOKI IM7580 series are high-frequency impedance analyzers for inspecting RF inductors, capacitors and EMC components on production lines and in the laboratory. Five models cover measurement frequencies from 100 kHz up to 3 GHz, each working in both impedance analyzer and LCR meter modes. A 0.5 ms analog measurement time, 0.07% typical repeatability, a contact check and five equivalent-circuit analysis models support fast, reliable sorting of common-mode filters, ferrite bead arrays and power inductors.

Available Models: 5 Variants
IM7580AIM7581IM7583+2
More Details HIOKI IM7580 Series High-Frequency Impedance Analyzer
HIOKI IM3590 Chemical Impedance Analyzer
Component & Battery Testing
Electrical test & measurement•Impedance analyzers & LCR meters

HIOKI IM3590 Chemical Impedance Analyzer

The HIOKI IM3590 is a chemical impedance analyzer for electrochemical impedance spectroscopy of batteries, electrochemical components and materials. It sweeps from 1 mHz to 200 kHz with ±0.05% basic accuracy and uses an automatically adjusted DC bias to measure the internal impedance of battery cells. Cole-Cole plots and equivalent-circuit analysis are built in and shown on the 5.7-inch touch display, giving battery and materials researchers results without external software.

More Details HIOKI IM3590 Chemical Impedance Analyzer
HIOKI IM3536 LCR Meter
Component & Battery Testing
Electrical test & measurement•Impedance analyzers & LCR meters

HIOKI IM3536 LCR Meter

The HIOKI IM3536 is a general-purpose LCR meter that measures from DC and 4 Hz up to 8 MHz with ±0.05% rdg basic accuracy. A 1 ms test time, a built-in contact check and a guaranteed accuracy range starting at 1 mΩ deliver stable, repeatable results for capacitors, inductors, resistors and other electronic components. Its speed and reliability simplify the design of automated production and incoming-inspection lines.

More Details HIOKI IM3536 LCR Meter
HIOKI IM3523 / IM3533 LCR Meter
Component & Battery Testing
Electrical test & measurement•Impedance analyzers & LCR meters

HIOKI IM3523 / IM3533 LCR Meter

The HIOKI IM3523 and IM3533 are LCR meters with ±0.05% rdg accuracy and a 2 ms measurement time for component testing. The IM3523 (DC, 40 Hz to 200 kHz) is designed for integration into production lines and automated test systems. The IM3533 (DC, 1 mHz to 200 kHz) adds transformer measurements such as turn ratio, mutual inductance and inductance difference, with temperature-compensated DCR, for winding and coil production, R&D and electrochemical applications.

Available Models: 2 Variants
IM3523IM3533
More Details HIOKI IM3523 / IM3533 LCR Meter
HIOKI RM2610 Electrode Resistance Measurement System
Component & Battery Testing
Electrical test & measurement•Resistance meters

HIOKI RM2610 Electrode Resistance Measurement System

The HIOKI RM2610 is an electrode resistance measurement system for lithium-ion battery research and process control. It separates and quantifies the composite layer resistivity (Ω·cm) and the interface resistance between the composite layer and the current collector (Ω·cm²) of an electrode sheet. This gives battery manufacturers and laboratories a direct way to evaluate electrode formulations, coating and calendering conditions before cells are assembled.

More Details HIOKI RM2610 Electrode Resistance Measurement System
HIOKI RM3544 / RM3545 DC Resistance Meter
Component & Battery Testing
Electrical test & measurement•Resistance meters

HIOKI RM3544 / RM3545 DC Resistance Meter

The HIOKI RM3544 and RM3545 are benchtop DC resistance meters for high-accuracy low-resistance testing. The RM3545 measures from 10 mΩ to 1000 MΩ ranges with 0.01 µΩ resolution at 2.2 ms, and accepts the Z3003 multiplexer unit for high-speed multi-point testing. The RM3544 covers 30 mΩ to 3 MΩ ranges with temperature correction for fast production-line checks of windings, contacts, welds, fuses and busbars.

Available Models: 2 Variants
RM3544RM3545
More Details HIOKI RM3544 / RM3545 DC Resistance Meter
HIOKI RM3548 Portable Low Resistance Meter
Component & Battery Testing
Electrical test & measurement•Resistance meters

HIOKI RM3548 Portable Low Resistance Meter

The HIOKI RM3548 is a portable micro-ohmmeter for maintenance and acceptance testing of large electrical equipment. It offers 0.02% basic accuracy, 0.1 µΩ best resolution, a 1 A maximum test current and ranges up to 3.5 MΩ, and stores up to 1000 readings for later reporting. Technicians use it on site to check motor and transformer windings, busbar and cable joints, earth bonding and welded connections.

More Details HIOKI RM3548 Portable Low Resistance Meter
HIOKI BT4560 Battery Impedance Meter
Component & Battery Testing
Electrical test & measurement•Battery testers

HIOKI BT4560 Battery Impedance Meter

The HIOKI BT4560 battery impedance meter judges the quality of lithium-ion cells in about 10 seconds using low-frequency AC-IR measurement. By varying the measurement frequency from 0.1 Hz to 1050 Hz, it captures both electrolyte resistance and reaction resistance, offering a fast alternative to charge/discharge DC-IR testing. It measures impedance and voltage at the same time, accepts cells up to 5 V and comes with software for Cole-Cole plots, making it suited to cell grading, incoming inspection and second-life battery evaluation.

More Details HIOKI BT4560 Battery Impedance Meter
HIOKI BT3561A / BT3562A / BT3563A / BT3564 Battery HiTester
Component & Battery Testing
Electrical test & measurement•Battery testers

HIOKI BT3561A / BT3562A / BT3563A / BT3564 Battery HiTester

The HIOKI BT356xA series and BT3564 Battery HiTesters measure internal resistance and voltage of cells, modules and packs on production and inspection lines. Models are matched to the battery voltage, from small cells and 60 V packs up to 1000 V packs for electric vehicles and energy storage systems. Higher tolerance to line resistance, standard LAN and improved electrostatic and noise resistance make automatic battery test systems easier to design and more stable in operation.

Available Models: 4 Variants
BT3561ABT3562ABT3563A+1
More Details HIOKI BT3561A / BT3562A / BT3563A / BT3564 Battery HiTester
HIOKI BT3554 Portable Battery Tester
Component & Battery Testing
Electrical test & measurement•Battery testers

HIOKI BT3554 Portable Battery Tester

The HIOKI BT3554 is a portable battery tester for diagnosing UPS and stationary lead-acid batteries without taking them offline. It measures and saves internal resistance and voltage in about 2 seconds, and its comparator gives an immediate pass, warning or fail judgment for each cell. Measurement and recording guidance speeds up rounds in battery rooms, and the optional Z3210 wireless adapter sends results to a phone or tablet for reporting in data centers, telecom sites and substations.

Available Models: 3 Variants
BT3554-50BT3554-51BT3554-52
More Details HIOKI BT3554 Portable Battery Tester
HIOKI ST4030A Impulse Winding Tester
Component & Battery Testing
Electrical test & measurement•Impulse winding testers

HIOKI ST4030A Impulse Winding Tester

The HIOKI ST4030A impulse winding tester (surge tester) diagnoses the insulation quality of motor windings, including rotors and stators in their assembled state. Instead of comparing waveform areas, it quantifies the response waveform as LC and RC values, which reveals single-turn faults that conventional testers miss. With 200 MHz sampling at 12-bit resolution, up to 4200 V applied voltage and an optional partial discharge detection function, it serves motor production lines and rewinding workshops.

More Details HIOKI ST4030A Impulse Winding Tester
HIOKI ST5540 / ST5541 Leak Current HiTester
Electrical Safety & Field Testers
Electrical test & measurement•Safety testers

HIOKI ST5540 / ST5541 Leak Current HiTester

The HIOKI ST5540 and ST5541 are leakage current testers for electrical safety compliance. The ST5540 covers medical electrical equipment to IEC 60601-1, including patient leakage current, and the ST5541 addresses general electrical equipment to standards such as IEC 60990, IEC 60950-1 and IEC 60335-1. Uninterrupted polarity switching, support for rated currents up to 20 A, and USB and external I/O interfaces enable automatic leakage testing on production lines and in test laboratories.

Available Models: 2 Variants
ST5540ST5541
More Details HIOKI ST5540 / ST5541 Leak Current HiTester
Product enquiry

Need an instrument for your process?

Need a level sensor, flowmeter, pressure transmitter, temperature sensor or liquid-analysis instrument? Share the process medium, operating conditions and preferred specifications so we can discuss suitable options.

Industrial Instrumentation Catalog | Neodyn Group — Page 10